Product Notes
- Standard flow calibration is in water @ 70°F. Calibrated on increasing flow.
- Temperature effect on flow settings: water calibration, slight change; oil varies with viscosity.
- Strain reliefs are standard. Optional silicone potting avail. Consult factory.
- Optional 100W SPST reed switches are stocked. Consult factory.
- Relays for higher loads, junction boxes, terminal strips, etc. are available. See accessories section for details
- Optional cables available. Consult factory.
- Other wetted materials: ceramic ring magnet.
- Optional SST identification tags attached to the unit. Consult factory.
- Optional MIS connector.
MS3102E1 0S-3P - Optional port sizes: BSP, SAE, silver braze, socket weld, etc. Consult factory.
- High-temperature units available to 400°F. Consult factory.
- Standard flow settings are calibrated in water. Other set points in water or oil are available. Consult factory.
- For pipe sizes smaller than 314″, install appropriate size bushings.
- Calibration: Flow stands are calibrated to the National Bureau of Standards and Thomas Products Ltd. recalibration schedule.
-
Weight: 1 lbs
Dimensions: 8 × 5 × 3 in
Process Connection: 3/4" FNPT, 1" FNPT, 1-1/4" FNPT, 1-1/2" FNPT, 2" FNPT, 2-1/2"FNPT, 3" FNPT
Housing Material: SST
Flow Set Point: 0.5 GPM, 1.0 GPM, 1.5 GPM, 2.0 GPM, 3.0 GPM, 4.0 GPM, 5.0 GPM, 6.0 GPM, 7.5 GPM, 8.0 GPM, 10.0 GPM, 12.0 GPM, 15.0 GPM, 16.0 GPM, 20.0 GPM, 25.0 GPM, 26.0 GPM, 30.0 GPM, 35.0 GPM, 40.0 GPM, 50.0 GPM, 60.0 GPM, 75.0 GPM, 100.0 GPM
